Airflow - The front panel of the CiT Slammer is distinctive with a combination of a solid front and ten individual rectangular shapes, 1.6 centimetres in diameter with small mesh situated nicely behind the two ARGB fans guarantees astute airflow for a Micro-ATX chassis.
Cooling Support - Three factory installed ARGB fans are pre-installed and with support for another two fans Top: Space For 2 x 120mm Fans. This Micro-ATX casing also can fit a 360mm radiator at the front, a 240mm radiator at the top and a 120mm radiator in the rear of the case.
ARGB LED Fans - The Three ARGB fans that are pre-installed are available with approximately 30 colour LED combinations, simply plug in the power and using the LED button easily switch between the LED modes and enjoy the visual experience.
Motherboard Sync - Take your colour to new levels with the included Aura Sync Cable, easily connect the 3 Pin AURA to a 5V 3 Pin connection on a compatible motherboard and you can use the mobo software for system-wide lighting synchronization.
Tempered Glass Panel - CiT have made the Slammer so easy to build in and featuring a solid tempered glass side panel with a hinged door design, screwless, making it even easy to build inside.
MATX Chassis - From Mini-ITX to Micro-ATX Motherboards are compatible, graphics cards up to 325mm in length and CPU Cooler up to 165mm in height can fit into the Micro-ATX housing, making this the perfect case for enthusiasts.
Specifications
| Chassis Dimensions (Excluding Fascia / Panels): |
(W) 201 x (H) 410 x (D) 330mm |
| Fan Controller Included: |
Yes |
| Fan Controller Power Via: |
SATA Connector |
| LED Controller: |
Yes - LED Button |
| Supported Qty of Fans (Max.): |
Daisy Chain |
| Supported Qty of LEDs (Max.): |
Daisy Chain |
| Fan Information: |
|
| Fans Powered Via: |
4 Pin Proprietary |
| LEDs Powered Via: |
4 Pin Proprietary |
| PSU Max. Length (mm): |
190mm |
| Packaging Type: |
EPE Foam |
| Packaging Thickness: |
23.77mm |
Case Specifications
| Form Factor: |
Micro ATX |
| Motherboard Support: |
Micro ATX, Mini ITX |
| PSU Support: |
Standard ATX |
| PSU Location: |
Bottom |
| Gaming Case: |
Yes |
| Water Cooling: |
Water Cooling Ready!
Supported Radiator Size: 360mm
Supported Radiator Positions: Front, Top |
| Body Material: |
0.5mmSPCC |
| Front Bezel Material: |
ABS & Mesh |
| Side Panel: |
Tempered Glass |
| Internal Cable Management Depth: |
20mm |
| External Bays: |
|
| Internal Bays: |
2 x 3.5” Internal
3 x 2.5” Internal |
| Drive Bay Notes: |
1 x 2.5" shared with 1 x 3.5" |
| Expansion Slots: |
4 x Full Size |
| Cooling Front: |
Space For 3 x 120mm or 3 x 140mm Fans (2 x 120mm ARGB Fans Included) |
| Cooling Top: |
Space For 2 x 120mm Fans |
| Cooling Rear: |
Space For 1 x 120mm Fan (1 x 120mm ARGB Fan Included) |
| Cooling Side: |
None |
| Cooling Bottom: |
None |
| IO Ports: |
1 x USB 3.0
2 x USB 2.0
1 x HD Audio
1 x Microphone |
| GPU Max Length: |
325mm |
| CPU Cooler Maximum Height: |
165mm |
| Front Bezel Colour: |
Black |
| Body Colour: |
Black |
| System Cabinet Features: |
|
| PSU Included: |
No |
General Specifications
| Manufacturer Part Number: |
CIT-SLAMMER |
| EAN Number: |
5055492412638 |
| Has Mains Plug: |
No |
| Colour: |
Black |
| What's In The Box: |
Case
Manual
Screw Pack |
| Unit (Product) Dimensions (mm): |
201mm x 426mm x 370mm (W x H x D) |
| Packaging Dimensions (mm): |
260mm x 435mm x 470mm (W x H x D) |
| Net Weight (KGs): |
3.7 KGs |
| Gross Weight (KGs): |
4.6 KGs |
|
