PALICOMP CS1002 ARGB
| Motherboard Support | Micro & Standard ATX |
| External 5.25" Drive Bays | 0 |
| External 3.5" Drive Bays | 0 |
| Internal 3.5" | 2 |
| Internal 2.5" | 2 |
| Rear Cooling | 1 x 120mm (Optional) |
| Front Cooling | 3 x 120mm/140mm (120mm Optional) |
| Side Cooling | N/A |
The CS1002 is an ATX PC gaming case with a difference, the front panel comes with an ARGB LED strip that has several colour modes to choose from. Connect your 3pin AURA to a compatible motherboard and your choice of LED combinations are endless. Control using your motherboard or the reset button located on the top of the I\O port.
Getting the correct balance of air running through your system is no problem with room to mount four fans in total and mesh cut outs running down the right-hand side enables your build to always run at it’s peak.
Want a clean looking system with the 1002 you now can with five cut outs in total and a full-length PSU shroud are perfect for building a great looking chassis.
The I\O ports are easily located on the top of the chassis for easy access and allowing connection to a variety of different devices.
Main Features
- Design - The 1002 is an ATX gaming case with a unique design it comes with an ARGB LED strip, mesh cut outs on the right-hand side to provide good airflow, and a full acrylic side panel.
- ARGB LED Strip - The ARGB strip comes with a 3pin AURA connector and once connected to a compatible motherboard you can control your LEDs through your motherboard software or the LED button. Your choices are endless.
- LED Button - Using the reset button gives the user easier access when changing the colour of your Rainbow LED strip.
- Cooling - The 1002 has room to mount four fans in total and you can fit up to a 240mm radiator at the front and a 120mm radiator at the back of the chassis, enhance your cooling options further.
- Acrylic Side Panel - The left side comes with a full acrylic side panel to showcase your internal components.
