£50.00
 
 
 
Current Stock Level
 
 

CIT LEVEL 5 - White

 
 
 
 
 
Motherboard Support Micro-ATX + Mini-ITX
External 5.25" Drive Bays 0
External 3.5" Drive Bays 0
Internal 3.5" 2
Internal 2.5" 1
Rear Cooling 1 x 120mm fan (120mm RGB Included)
Front Cooling 3x120/2x140mm fans (3x120mm RGB Included)
Top/Bottom Cooling 2 x 120/140mm (Top - Optional)
 
 

 

Key Features

  • Mesh Micro-ATX Gaming Case - The CiT Level 5 is a bold and sophisticated gaming case finished in all white with a mesh front panel allows air to flow into the case easily without obstruction combining a super airflow performance with dust filtration, makes this stylish chassis both comfortable in a state-of-the-art office and gaming room.
  • High-Airflow - Three pre-installed PWM ARGB Fans with a seven-fin blade fan design and equipped with 8 LEDs adds a stunning finish. The fans generate a speed of 800 to 1600 RPM and pushing up to 65 CFM of air with a total noise level of 25.87dBA, the pre-installed fans do not compromise on thermal control.
  • PWM Fan Control - The hub can be connected to the CPU fan interface on your chosen Motherboard to access temperature readings. An increased CPU temperature increases the fan speed automatically and swiftly cools the system down. Conversely when the CPU temperature decreases the fan automatically slows reducing the overall noise.
  • Fan Controller Included - A PWM hub is included inside the Level 5 which allows you to add up to 6 case fans and is powered directly from your power supply via SATA. You can access it using the LED button and it's connected to the Motherboard using a single cable - you can setup without any additional cables.
  • Motherboard Software - The ARGB lighting effects can be synced through the Motherboard which supports ARGB function, 5V 3-Pin Addressable RGB header, including ASUS AURA, MSI Mystic Light, Gigabyte Fusion 2.0 & ASRock. Customise the look with endless possibilities with 16.7 million static modes and 12 pre-set lighting effects.
  • Air Cooling - Cool your system effectively with three fans included and the Level 5 offers enough space to house eight fans in total Front: 3 x 120mm or 2 x 140mm Fans, Top: 2 x 120mm or 2 x 140mm Fans, Rear: 1 x 120mm Fan & PSU Shroud: 2 x 120mm Fans. The Micro-ATX casing can also house a 280mm radiator at the top.
  • Tempered Glass Panel - The solid tempered glass side panel offers an excellent view of the interior specifically of the Micro-ATX Motherboard.
  • Micro-ATX Housing - Mini-ITX and Micro-ATX Motherboards are compatible and graphics cards up to 320mm in length and CPU cooler up to 180mm in height, there is adequate space for mainstream hardware to build a high-powered PC Gaming case. Additionally, the I/O panel located at the bottom for easy access possesses one USB3.0 port, one USB2.0 port, Audio & Mic combo port & an LED button. There are four expansion slots on the rear panel for PCIe devices.
  • Dust Filter - Two removable dust filters help keeps the dust out of your gaming PC and enhances the cooling performance even further, they are easy to remove which makes them easy to clean.

    •  

     

    Specifications

    Chassis Dimensions (Excluding Fascia / Panels): (W) 221 x (H) 396 x (D) 367mm
    Water Cooling Support:  
    Top Supported Radiator(s): 120mm, 240mm and 280mm
    Rear Supported Radiator(s): 120mm
    3 x PWM ARGB Fans Included:  
    Fan Powered Via: 4pin PWM
    Fan LEDs Powered Via: 3pin AURA
    Fan Controller Support:  
    Fan Controller Included: Yes - PWM
    Fan Controller Power Via: SATA Connector
    LED Controller: Yes
    Fan Power Connector: 3 or 4pin
    LED Power Connector: 3pin AURA
    Fan Control Via: LED Button or MB Sync
    Supported Qty of Fans (Max.): 6
    Supported Qty of LEDs (Max.): 6
    Additional Chassis Specifications:  
    Motherboard Max. Size: (W) 244 x (D) 244mm
    PSU Max. Length: 180mm
    HD Audio Ports: Combined Headphone / Mic
    Dust Filters: 1 x Top & 1 x PSU Intake

    Case Specifications


    Form Factor: Micro ATX
    Motherboard Support: Micro ATX, Mini ITX
    PSU Support: Standard ATX
    PSU Location: Bottom
    Gaming Case: Yes
    Water Cooling: Water Cooling Ready!
    Supported Radiator Size: 280mm
    Supported Radiator Positions: Top
    Body Material: 0.4mmSPCC
    Front Bezel Material: ABS & Mesh
    Side Panel: Tempered Glass
    Internal Cable Management Depth: 20mm
    External Bays:  
    Internal Bays: 2 x 3.5” Internal
    1 x 2.5” Internal
    Drive Bay Notes: 1 x 2.5" Shared with 1 x 3.5"
    Expansion Slots: 4 x Full Size
    Cooling Front: Space For 3 x 120mm or 2 x 140mm Fans (3 x 120mm PWM ARGB Fans Included)
    Cooling Top: Space For 2 x 120mm or 2 x 140mm Fans
    Cooling Rear: Space For 1 x 120mm Fan (1 x 120mm PWM ARGB Fan Included)
    Cooling Side: None
    Cooling Bottom: Space For 2 x 120mm Fans
    Fan Controllers: 1 Fan Controllers, controlling up to
    6 fans in total
    IO Ports: 1 x USB 3.0
    1 x USB 2.0
    1 x HD Audio
    1 x Microphone
    GPU Max Length: 320mm
    CPU Cooler Maximum Height: 180mm
    Front Bezel Colour: White / Mesh
    Body Colour: White
    System Cabinet Features:  
    PSU Included: No

    General Specifications


    Manufacturer Part Number: CIT-LEVEL5-MW
    EAN Number: 5055492415462
    Has Mains Plug: No
    Colour: White
    What's In The Box: Case
    Accessories
    Unit (Product) Dimensions (mm): 221mm x 402mm x 372mm (W x H x D)
    Packaging Dimensions (mm): 454mm x 454mm x 278mm (W x H x D)
    Net Weight (KGs): 4.6 KGs
    Gross Weight (KGs): 5.4 KGs

     

    There are yet no reviews for this product.
     

    Our Reviews

    &

    Read our reviews on Trustpilot