KOLINK Stronghold
| Motherboard Support | Micro & Standard ATX & E-ATX |
| External 5.25" Drive Bays | 0 |
| External 3.5" Drive Bays | 0 |
| Internal 3.5" | 3 |
| Internal 2.5" | 3 |
| Rear Cooling | 1 x 120mm (Included) |
| Front Cooling | 3 x 120mm (1 Included) |
| Top/Bottom Cooling | 2 x 120mm (Top) |
Stronghold Midi-Tower with its fantastic tempered glass side panel and brushed aluminium-look front. The capacious interior of the Stronghold allows for plenty of space for high-end hardware. Pre-installed dust filters, plenty of space for water cooling and superb cable management options are just some of the highlights of this case stunning, yet competitively-priced, Kolink case.
The Features of the Kolink Stronghold at a Glance
- Case designed for motherboards up to E-ATX
- Side panel in 4 mm thick tempered glass
- Plastic brushed aluminium-look front
- 2x pre-installed 120 mm fans, 6 total possible
- I/O Panel with 2x USB 2.0 / 1x USB 3.0 & HD Audio In/Out
- Support for two 240 mm radiators
- 3x 3.5/2.5" drive slots
- Graphics cards up to 38 cm long & CPU coolers up to 16 cm height
Tempered Glass Side Panel & Two Pre-Installed Fans
The robust chassis consists of one millimetre thick SECC steel and is equipped with a four millimetre thick tempered glass side panel and a plastic front with a stylish brushed aluminium look. The entire interior is coated in black and equipped with a power supply shroud to achieve an incredibly clean aesthetic. A hard drive cage with brackets for three 3.5- or 2.5" drives is also included.
In order to give the installed hardware the best possible airflow, the case comes with two of a total of six possible 120 mm fans with Molex connectors. One is placed at the lowest of three potential places behind the front, the second at the slot in the back. Two additional 120 mm fans can be installed under the top of the case.
Dust Filters Keep the Kolink Stronghold Clean
The motherboard tray and the power supply cover offer numerous openings for perfect cable management. A 240 mm radiator can be installed in the front and in the top of the Observatory's chassis. The air inlets come with fine dust filters in the roof and base of the chassis. They can be removed without tools and are strengthened with the help of a filigree honeycomb pattern.
Graphics cards up to 38 cm are compatible along with CPU coolers up to 16 cm in height. Additionally the front of the case comes with an I/O panel including two USB 2.0 connectors and a USB 3.0 Type-A port. There is also a slot for a switch to control the RGB lighting, but this is not included in the housing and must be retrofitted separately.
Technical Details:
- Dimensions: 201 x 435 x 435 mm (W x H x D)
- Material: Steel, Tempered Glass
- Weight: approx. 5.75 kg
- Colour: Black
- Form Factor: E-ATX (up to 279 mm wide), ATX, Micro-ATX, Mini-ITX
- Total Possible Fans:
3x 120 mm (Front)
2x 120 mm (Top)
1x 120 mm (Rear) - Pre-Installed:
1x 120 mm Molex (Front)
1x 120 mm Molex (Rear) - Radiator Mountings:
1x 240 mm (Front)
1x 240 mm (Top) - Filter: Top, Bottom
- Drive Bays:
3x 3.5/2.5" (internal) - Power Supply: 1x Standard ATX up to 200 mm (optional)
- Expansion Slots: 7
- I/O Panel:
2x USB 2.0 (internal connection)
1x USB 3.0 (internal connection)
1x Audio In/Out - Maximum GPU Length: 380 mm
- Maximum CPU Cooler Height: 160 mm
